CABLE TYPE: TIOI, TICI, TUOU, TUCU 3.6/6 kV, 6/10 kV, 8.7/15 kV
CONSTRUCTION
| 1. |
Conductor |
Stranded plain annealed copper wires as per IEC 60228, Class 2 |
| 2. |
Conductor screen |
Semiconducting layer compound |
| 3. |
Insulation [T] |
XLPE as per IEC 60092-351 |
| 4. |
Insulation screen |
Non-metallic part: semiconducting layer compound
Metallic part: copper tape
A suitable separator tape(s) may be
applied over the metallic jacket |
| 5. |
Cabling |
Three metallic wrapped conductors shall be cabled
Flame retardant & non-hygrocopic fillers may be used
Suitable tape(s) may be applied on the cabled core
A filler may be applied to obtain a circular cable |
| 6. |
Inner covering [I] |
SHF 1 as per IEC 60092-359 |
| 7. |
Armour [O] |
Braid of tinned annealed copper wire
Coverage density: min. 90% |
| 8. |
Sheath [I] |
SHF 1 as per IEC 60092-359
Sheath color: Red |
| 9. |
Identification |
Color tape shall be inserted under metallic screen
3C - Black, Brown, Grey |
| NOTE : The order color of sheath and insulation may be applicable when purchaser required. |
APPLICATION STANDARD
| 1. |
Design guide |
: IEC 60092-350, IEC 60092-353 & IEC 60092-354 |
| 2. |
Insulation material |
: IEC 60092-360, XLPE |
| 3. |
Sheath material |
: IEC 60092-360, SHF 1, SHF 2, ST2 |
| 4. |
Flame retardant |
: IEC 60332-1 &IEC 60332-3 Category A |
| 5. |
Halogen content |
: IEC 60754-1, 0.5 %↓ |
| 6. |
Smoke emission |
: IEC 61034, 60% ↑ |
| 7. |
Cold bend/impact |
: CSA 22.2 No.0.3 (-40?C / -35?C) |
| 8. |
Max. rated conductor temp. |
: 900C |
CABLE DESIGNATION
3.6/6 , 6/10, 8.75/15 kV TIOI (CU/XLPE/CTS/SHF1/TCWB/SHF1)
3.6/6 , 6/10, 8.75/15 kV TICI (CU/XLPE/CTS/SHF1/GSWB/SHF1)
3.6/6 , 6/10, 8.75/15 kV TIOI (CU/XLPE/CTS/SHF2/TCWB/SHF2)
3.6/6 , 6/10, 8.75/15 kV TUCU (CU/XLPE/CTS/SHF2/GSWB/SHF2)
3.6/6 , 6/10, 8.75/15 kV (CU/XLPE/CTS/ST2/GSWB/ST2)
